Sändar/Mottagar Batteri Li-Po 7,4V 2800mAh

A powerful 2S LiPo battery that can be used as a general "HV" receiver battery (please check that the receiver and servos are "HV") or also as a transmitter pack in some Futaba transmitters (see below).

Never leave the charging unattended.

Only use it in these transmitters and the Yuntong YT002 charger:

T4PL/S & T4GRS - Note, use it on your own risk as the transmitter is not made for 2S LiPo and does not have a battery alarm that works with 2S LiPo. Stop using the radio when TX battery voltage gets to 6.6V
T4PX - Please choose "other" as battery type and set battery alarm level to: 6.6V
T7PX - Please choose "other" as battery type and set battery alarm level to: 6.6V
T10J - Note, use it on your own risk as the transmitter is not made for 2S LiPo and does not have a battery alarm that works with 2S LiPo. Stop using the radio when TX battery voltage gets to 6.6V
T14SG - Stop using the radio when TX battery voltage gets to 6.6V
T16SZ - Please choose "manual" as battery type and set battery alarm level to: 6.6V
T18SZ - Please set the manual battery alarm level to: 6.6V


Specifications:

2S 7.4V LiPo battery
Capacity: 2800 mAh
Power: 20.72 Wh
Recommended charging current: Max 1A
Futaba connector
Size: L69 x H41 x W17 mm
Weight: 106 g